Eir Seriec Impulse Relay 16A Normal Open or Close 1p

• Customization: Available
• Theory: Electromagnetic Relay
• Usage: Household Appliances Relay, Lathe Relay, Lights Refrigerators TV Sets
• Model NO.: EIR
• Phase: 1
• Electricity Type: Ac
• Number of Pole: 2
• Load: Sealed Relay
• Protective Characteristics: Sealed Relay
• Action Principle: Electromagnetic Type
• Size: Miniature
• Type: Electric Parameter Relay
• Contact Load: Low Power
• Insulation Voltage: 440VAC
• Pollution Degree: 3
• Rated Impulse Withstand Voltage: 6kv
• Transport Package: by Sea/Air
• Specification: box
• Trademark: Onccy
• Origin: China
• HS Code: 8536490090
• Production Capacity: 1000000PC/Year
• Package Size: 50.00cm * 50.00cm * 50.00cm
• Package Gross Weight: 1.000kg

Product Description

Applicable scope
EIR series impulse relay coils are triggered by impulses and the contacts are closed. The product has two stable mechanical positions, and the contacts will open temporarily with the next impulse. Each received impulse will reverse the position of the contact and can be controlled by an unlimited number of buttons. And has the characteristics of zero power consumption.
Impulse relay can be used to control the lighting circuit through the button. The circuit consists of incandescent lamps, halogen lamps, etc. (resistive load); fluorescent lamps, discharge lamps, etc. (inductive load).
Conform to standard:IEC/EN 60669-2-1,IEC/EN 60669-2-2

Main parameter and technical performance

Main parameter and technical performance

Main parameter and technical performance

Dissipated power (during the impulse)		19 VA
Illuminated PB control		Max. current 3 mA (if > use an ATLz)
Operating threshold		Min. 85 % of Un
Duration of the control order		50 ms to 1 s (200 ms recommended)
Response time		50ms
Power circuit
Voltage rating		250V AC
Frequenc		50/60Hz
Maximum number of operations per minute		5
Maximum number of switching operation a day		100
Endurance		200,000 cycles(AC21)
		100,000 cycles(AC22)
Overvoltage category		IV
Insulation voltage		440 V AC
Pollution degree		3
Rated impulse withstand voltage		6kV
Degree of protection	Device only	IP20
	Device in modular	Ip40(Insulation class II)
Operating temperature		-5ºC~+60ºC
Storage temperature		-40ºC~+70ºC
Tropicalization		Treatment 2 (relative humidity 95 % at 55ºC

 

Detailed Photos

 

The table below shows the maximum number of light fittings for each relay, according to the type, power and configuration of a given lamp. As an indication, the total acceptable power is also mentioned. These values are given for a 230 V circuit with 2 active conductors (single-phase phase/neutral or two-phase phase/phase). For 110 V circuits, divide the values in the table by 2.To obtain the equivalent values for the entire 230 V three-phase circuit, multiply the number of lams and the maximum power output: by (1.73) for circuits with 230 V between phases without neutral; by for circuits with 230 V between phase and neutral or 400 V between phases.
Note: The power ratings of the lamps most commonly used are shown in bold. For powers not mentioned, use a proportional rule with the nearest values.

Company Profile

FAQ
Q: Are you trading company or manufacturer ?
A: We are manufacturer. We have 30,000 square meters of self-owned plant.

Q: Do you have any certificates?
A: Yes,we have UL, TUV, CB, SAA, CCC, CE and other certifications.

Q: How do we make a quick response to customer , 5 inquiry ?
A: Our professional team will reply you online or by email,Skype, whatsApp and so on.

Q: Do you have any exporting experience?Which countries did you export to before?
A: We have lots of exporting experience and customers in many countries,such as America, Japan,Australia,UAE,Canada,Vietnam,Turkey,Thailand,Russia,UK,etc.

Q:Can you supply samples for checking ?
A: Yes, we can supply samples, pls contact for detailed required.

Q:How long is your delivery time?
A: Generally it is within 3days for small qty. Or it is around 15-20 days to a general order.

Q: What is the standard of package of your goods?
A: Export standard package or special package according to customer requirement.

Q:How about inspection?
A: We have the whole inspection system from raw material to end products include transient test, delay test,mechanical life test and so on.Q:What is the service offered by company?

A: We have the professional engineer team which can design and develop the mould to arrive different customer requirements. We also have the professional sales team to offer good service from pre-sale to after-sale