Customization: | Available |
---|---|
Type: | Low-voltage |
Structure: | Single-column Disconnector |
Still deciding? Get samples of US$ 15/Piece
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Product Benefits
Technical Data
Type designation | EAS5EL/20 | EAS5EL/35 | EAS5EL/63 | ||
Ambient temperature | -5°C ~+40°C | ||||
Interrupting medium | Air | ||||
Utilization category | AC-22A | ||||
Number of poles | 1P(x=1), 2P(x=2) | 1P(y=1), 2P(y=2), 3P(y=3) , 4P(y=4) | |||
Rated operational voltage / current | N: AC250(1P),AC440V(2P/3P/4P) | ||||
Rated frequency | 20A | 35A | 63A | ||
Rated Insulation voltage | (Ie) | 50/60Hz | |||
Conventional free air thermal current | 500 V | ||||
Conventional enclosed thermal current | (Ui) | // | |||
Rated short-time withstand current | (Ith) | 20A | 35A | 63A | |
Rated short-time making capacity | (Ithe) | 0,76kA, 1s | |||
Rated conditional short-circuit current | (Icw) | 1,5kA | |||
Short circuit protective device | (Icm) | // | |||
Rated Impulse withstand voltage | (Icn) | 4,0 kV | |||
Overvoltage category | II | ||||
IP code | (Uimp) | IP66 | |||
Pollution degree | 3 | ||||
Suitability for isolation | Yes |
Type designation | EAS50EL |
Number of poles | 1P, 2P, 3P, 4P |
Terminal designation, main circuit | 1, 2 ; 1, 2, 3, 4 ; 1, 2, 3, 4, 5, 6 ; 1, 2, 3, 4, 5, 6, 7, 8 |
Type of terminal, main circuit | Screw terminal |
Rated cross sectional area, main circuit | 2,5-25mm2 |
Type of conductor | Flexible or rigid |
Number of conductors per terminal | 1 |
Required preparation of the conductor | No |
Stripping length (mm), main circuit | - |
Tightening torque, main circuit (Nm) | 2,5Nm (M6) |