AC Isolation Switch Door Interlocking 800V 80A 125A 3p 4p

• Customization: Available
• Type: Low-voltage
• Structure: Single-column Disconnector
• Model NO.: EAS80
• Installation: DIN Rail
• Operation: Electric
• Grounding Mode: Grounding
• Movement Mode: Plug-in Type
• Number of Poles: 1p/2p/3p/4p
• Grounding: Single Ground
• Series: Single-Stage
• Run: Vertical Rotation
• Switching Mode: Single Throw-in
• Common Model: EAS
• Structure of Operating: Electric
• Certification: RoHS, CE, SAA, TUV, UL, CB
• Brand: Onccy
• Warranty: 5years
• Voltage Ui: 500V
• Rated Current: 40A/80A
• Condition: 100% Original
• Application: Solar PV System/EV Charger System
• Transport Package: by Sea/Air
• Specification: box
• Trademark: Onccy
• Origin: China
• HS Code: 8536490090
• Production Capacity: 1000000PC/Year
• Package Size: 50.00cm * 50.00cm * 50.00cm
• Package Gross Weight: 1.000kg

Product Description

Product Description

 

• Rated Voltage: Max to 690V
• Rated Current: Max to 125 Amps
• Utilization Category: AC-23, AC-3
• Rated Insulation Voltage (Ui): 800 V
• Rated Short-Time Marking Capacity (Icm): 20kA
• Short-Circuit Protection of Fuse: 500 V / 125 A

EAS80AC lsolator Door Interlock  is a durable weatherproof non-fused disconnect / isolator switch designed for areas that encounter dusty or wet conditions. Featuring an voltage rating of 415 V, 50 Hz, this unit features one normally open auxillary contact in addition to the two-position selector switch. This isolator switch is equipped with two M63 moulded plastic cable glands with a diameter of 27-48 mm.

The two position selector switch on the EAS7 AC lsolator Door Interlock  is labeled "ON" and "OFF". The switch is key lockable for lock out or tag out.

Rated Voltage: Max to 800V
Rated Current: Max to 125 Amps
Utilization Category: AC-23, AC-3
Rated Insulation Voltage (Ui): 800 V
Rated Withstand Impulse Voltage (Uimp): 5kV
Rated Short-Time Withstand Current (Icw): 10 kA
Rated Short-Time Marking Capacity (Icm): 20kA
Short-Circuit Protection of Fuse: 500 V / 125 A

Technical Data

Current(≤40°C) Agreed heating current		63A	80A	100A	63A	80A	100A	63A	80A	100A
IEC rated operational current Ie AC-21A/B(≤690V)		63A/63A	80A/80A	100A/100A	63A/63A	80A/80A	100A/100A	63A/63A	80A/80A	100A/100A
IEC rated operational current Ie AC-22A/B	415V	63A/63A	80A/80A	100A/100A	63A/63A	80A/80A	100A/100A	63A/63A	80A/80A	100A/100A
	500V
	690V	40A/63A	63A/80A	63A/80A	40A/63A	63A/80A	63A/80A	40A/63A	63A/80A	63A/80A
IEC rated operational current Ie AC-23A/B	415V	63A/63A	80A/80A	100A/100A	63A/63A	80A/80A	100A/100A	63A/63A	80A/80A	100A/100A
	500V	63A/63A			63A/63A			63A/63A
	690V	40A/40A			40A/40A			40A/40A
IEC rated operational current Ie DC-21B	110VDC	1 63A	1 80A	1 100A	1 63A	1 80A	1 100A	1 63A	1 80A	1 100A
	250VDC	63A 2	80A 2	100A2	63A 2	80A2	100A2	63A 2	80A2	100A 2
	400VDC	40A3			40A3			40A3
IEC rated operational power (3 phase) AC-23A/B	415V	30KW	37KW	45KW	30KW	37KW	45KW	30KW	37KW	45KW
	500V
	690V

What are the Different Types of Electrical Isolator Switches?

01 Add-on Auxiliary Contacts

The isolating switch adopts the same auxiliary contact, and the auxiliary contact and the main pole of the switch act at the same time. A normally open contact with pre-disconnect function can be provided as required.

The isolation switch can be installed with up to four auxiliary accessories (2 on the right, 2 on the left)

02 Terminal shrouds

The isolation switch terminal shroud has a simple appearance design, high-quality transparent PC material, flame-retardant, high strength, no color change after long-term use, high-quality waterproof and easy to install.

03  Side Mount Add-on Fourth Pole

Simultaneous or early contact operation of the fourth pole with respect to the switch disconnector poles.

04  Switch body

Onccy switch adopts compression contact opening and closing technology, and has the function of complete disconnection indication. It is an isolator,a

breaker or a switch, and with inlerlock mechanism, it can be to an exchage switch.

05  Rotating Handle Parts

Rotating handle, with anti-misoperation padlock design to prevent misoperation, safe and reliable; using high-quality flame-retardant materials, insulation and impact resistance; elegant and stylish design, beautiful and durable.

06  Rod extension

High-carbon steel material, beautiful and corrosion-resistant; coupled with high- temperature treatment, even if sufficient pressure is applied, it can maintain good smoothness; the products are standardized, easy to assemble, low cost, corrosion resistant, and cost-effective.

07  Mechanical interlocking mechanism

The interior is made of high-conductivity nickel-phosphorus copper, which has good conductivity and longer service life. The shell is made of high-strength flame- retardant PC material, which is fire- resistant and flame-retardant, in one step!

Detailed Photos

 

FAQ
Q: Are you trading company or manufacturer ?
A: We are manufacturer. We have 30,000 square meters of self-owned plant.

Q: Do you have any certificates?
A: Yes,we have UL, TUV, CB, SAA, CCC, CE and other certifications.

Q: How do we make a quick response to customer , 5 inquiry ?
A: Our professional team will reply you online or by email,Skype, whatsApp and so on.

Q: Do you have any exporting experience?Which countries did you export to before?
A: We have lots of exporting experience and customers in many countries,such as America, Japan,Australia,UAE,Canada,Vietnam,Turkey,Thailand,Russia,UK,etc.

Q:Can you supply samples for checking ?
A: Yes, we can supply samples, pls contact for detailed required.

Q:How long is your delivery time?
A: Generally it is within 3days for small qty. Or it is around 15-20 days to a general order.

Q: What is the standard of package of your goods?
A: Export standard package or special package according to customer requirement.

Q:How about inspection?
A: We have the whole inspection system from raw material to end products include transient test, delay test,mechanical life test and so on.Q:What is the service offered by company?

A: We have the professional engineer team which can design and develop the mould to arrive different customer requirements. We also have the professional sales team to offer good service from pre-sale to after-sale.