Customization: | Available |
---|---|
Type: | Low-voltage |
Structure: | 35mm DIN-Rail |
Still deciding? Get samples of US$ 21/Piece
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
This is an essential safety switch and is mandated in each photovoltaic power system according to IEC 60364-7-712. The corresponding British requirement comes from BS7671 - Part 712.537.2.1.1, which states "To allow maintenance of the PV convertor, means of isolating the PV convertor from the DC side and the AC side must be provided".
Product Benefits
EDS1 series isolation switch is suitable for a power system with rated voltage DC 1200V or below and rated current 32A or below. The product can be used for infrequent switching-on and switching-off and can disconnect 1 - 2 MPPT lines at the same time. It is especially suitable for isolating lines in HVDC transmission and distribution systems, such as cutting off the high voltage DC current between solar panels and inverters
Advantages
Product Benefits
Isolator switch is used to ensure that an electrical circuit is completely de-energised for service or maintenance. IP66 enclosures and other options are available for your selection to meet a variety of inverters types. Such switches are often found in electrical distribution , where equipment must have its source of driving power removed for adjustment or repair. Isolation switches are used in electrical substations to allow isolation of apparatus such as circuit breakers, transformers, and transmission lines, for maintenance. The disconnector is usually not intended for normal control of the circuit, but only for safety isolation.
Technical Data
Main Parameters | EDS1/N EDS1/S | ||
Rated Insulation Voltage | Ui | V | 1500 |
Rated thermal current | Ith | A | 32 |
Rated impulse withstand voltage | Uimp | V | 8000 |
Rated short-circuit making capacity | Icw | A | 1 kA,1 S |
Maximum cable section(incl.jumper) | |||
Solid | mm2 | 4-16 | |
Flexible | mm2 | 4-10 | |
Flexible(+multicore cable end) | mm2 | 4-10 | |
Torque | |||
Tightening torque terminal screws M4. | Nm | 1.2-1.8 | |
Tightening torque shell mounting screws ST4.2(304 stainless steel) | Nm | 1.5-2.0 | |
Tightening torque knob screws M3 | Nm | 0.5-0.7 | |
Switching on or off Torque | Nm | 0.9-1.3 | |
The wiring Torque on Base | Nm | 1.1-1.4 | |
General parameters | |||
Knob Positions | 12 o'clock,OFF 3 o'clock,ON 9 o'clock,OFF 12 o'clock,ON | ||
Electrical Life |
Actual | 3000 Cycles | |
Standard | 300 Cycles | ||
Mechanical Life |
Actual | 10000 Cycles | |
Standard | 10000 Cycles | ||
Number of DC poles | 2 or 4 | ||
Operation temperature | °C | -40 to +85 | |
Storage termperature | °C | -40 to +85 | |
Pollution degree | 3 | ||
Overvoltage category | III | ||
IP rating of shafte and mounting nul | IP66 |
Data according to AS60947-3
Main Contacts | Voltage | EDS1/N32 |
Rated thermal current Ithe | 32 A | |
Rated insulation voltage Ui | 1500 V | |
Distance of contacts(per pole) | 8 mm | |
Rated operational current Ie(DC-PV2) | ||
4 layers, only 2layers in series, with two load 1 2 |
300V | 32 A |
600V | 32 A | |
800V | 16 A | |
1000V | 9 A | |
4 layers, 4 layers in series, with one load 1 2 3 4 |
300V | 32 A |
600V | 32 A | |
800V | 32 A | |
1000V | 32 A |
EXPERIENCED PV PROTECTIVE PRODUCT AND EV CHARGING STATION MANUFACTURER
Q: Are you trading company or manufacturer ?
A: We are manufacturer. We have 30,000 square meters of self-owned plant.