| Customization: | Available |
|---|---|
| Usage: | Electronic, PV, Combiner Box, Low Voltage |
| Material: | Cable |
|
Still deciding? Get samples of US$ 6.76/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment methods: |
|
|---|---|
| Support payment in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The 1000V solar fuse is mainly used in the DC combiner box of solar photovoltaic power generation, to break the line overload and short-circuit current generated by the current feedback of solar panels, photovoltaic modules, and inverters that may generate solar energy, thereby protecting the solar photovoltaic module board. The fuse can also be optionally used in any other DC circuit for line overload and short-circuit protection of electrical components.
The features of the PV Modular fuse holders 10×38 is 1000V DC & 1500V DC rated voltages.They have been developed to offer a compact, safety and economic protection solution in photovoltaic installations where due to the increase of the power and technologic evolution, no-load voltages above 1000V DC can be achieved. Modular fuse holders for 10×38 are according IEC/EN 60269 standard. Compact design, with reduced distances.
Product Benefits
Product Benefits
Technical Data
| 1P, 1P+N, 2P | 230 VAC |
| 3P, 3P+N | 800 V AC |
| Rated operational current Ie | 32 A |
| Conditional short-circuit current | 10 kAr.m.s |
| Utilization category | AC 20 B |
| Rated impulse withstand voltage Uimp | 4 kV |
| Fuse-links | 10, 16, 20, 25 and 32 A |
| Operating class | gG(gL)/aM |
| Max. Power loss per current path | 3.2 W |
| Mechanical | |
| Frame size | 45 mm |
| Device height | 80 mm |
| Device width | acc. to dimensioned drawing |
| Weight | EAFH |
| 1P | 74G |
| 1P+N | 84G |
| 2P | 156G |
| 3P | 234G |
| 3P+N | 244G |
| Mounting | quick fastening on DIN rail IEC/EN 60715 |
| Degree of protection (built-in) | IP20 (IP40) |
| Upper and lower terminals | lift terminals |
| Terminal capacity | 1.5-10 mm2 |
| Tightening torque of terminal screws | max. 1.2 N.m |
| Dimensions of fuse-link | 10.3 x 38 mm |
){kind=link}