| Customization: | Available |
|---|---|
| Type: | Low-voltage |
| Structure: | 35mm DIN-Rail |
|
Still deciding? Get samples of US$ 22.69/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
This is an essential safety switch and is mandated in each photovoltaic power system according to IEC 60364-7-712. The corresponding British requirement comes from BS7671 - Part 712.537.2.1.1, which states "To allow maintenance of the PV convertor, means of isolating the PV convertor from the DC side and the AC side must be provided".
Product Benefits
EDS6EL Screw fixing doesn't interfere with the sealing performance;
Multiple mechanical seals around the shaft guarantee the reliability of a waterproof and moisture-proof design; Stainless steel rotary screw does not rust nor damp;
Standard cable interface available with seal rings;
Internal sealing in top and bottom covers, combined with 2 screws, guarantee an IP66 protection degree.
Product Benefits
Isolator switch is used to ensure that an electrical circuit is completely de-energised for service or maintenance. IP66 enclosures and other options are available for your selection to meet a variety of inverters types. Such switches are often found in electrical distribution , where equipment must have its source of driving power removed for adjustment or repair. Isolation switches are used in electrical substations to allow isolation of apparatus such as circuit breakers, transformers, and transmission lines, for maintenance. The disconnector is usually not intended for normal control of the circuit, but only for safety isolation.
Technical Data
| Main Parameters | 13 | 20 | 25 | 40 | 50 | ||
| Rated insulation voltage | Ui | V | 1500 | 1500 | 1500 | 1500 | 1500 |
| Rated thermal current | Ith | A | 32 | 40 | 55 | 55 | 55 |
| Rated impulse withstand voltage | Uimp | V | 8000 | ||||
| Rated short-time withstand current (1s) | Icm | A | 780 | ||||
| Rated short-time making capacity | Icm | 1200A | |||||
| Maximum cable cross sections (incl. jumper) | |||||||
| Solid or standard | mm² | 4-16 | |||||
| Flexible | mm² | 4-16 | |||||
| Flexible (+ multicore cable end) | mm² | 4-16 | |||||
| Torque | |||||||
| Tightening torque terminal screws M4. | Nm | 1.2-1.8 | |||||
| Tightening torque single hole mounting nut M16 | Nm | 2.0-2.3 | |||||
| Tightening torque knob screws M3 | Nm | 0.5-0.7 | |||||
| Switching on or off torque | Nm | 0.9-1.9 | |||||
| General parameters | |||||||
| Knob positions | 9 o'clock OFF, 12 o'clock, ON | ||||||
|
Electrical Life |
Actual | 3000 Cycles | |||||
| Standard | 300 Cycles | ||||||
|
Mechanical Life |
Actual | 10000 Cycles | |||||
| Standard | 10000 Cycles | ||||||
| Number of DC poles | 2 or 4 (6/8 geek choice) | ||||||
| Distance of contacts (per pole) | mm | 8 | |||||
| Operation temperature | ºC | -40 to +85 | |||||
| Store temperature | ºC | -40 to +85 | |||||
| Pollution degree | 3 | ||||||
| Overvoltage category | III | ||||||
| IP rating of shafte and mounting nut | IP66 | ||||||
| Number of layers | Voltage/Current (DC-PV1) | ||||
|
2/4 |
600Vdc | 800Vdc | 1000Vdc | 1200Vdc | 1500Vdc |
| 32 | 26 | 13 | 10 | 5 | |
| 40 | 30 | 20 | 12 | 6 | |
| 55 | 45 | 25 | 15 | 8 | |
| / | 50 | 40 | 30 | 20 | |
| / | 55 | 50 | 40 | 30 | |
|
4T/B/S |
/ | / | 32 | 26 | 13 |
| / | / | 40 | 30 | 20 | |
| / | / | 55 | 40 | 30 | |
| / | / | / | / | 45 | |
| / | / | / | / | 50 | |
EXPERIENCED PV PROTECTIVE PRODUCT AND EV CHARGING STATION MANUFACTURER
Q: Are you trading company or manufacturer ?
A: We are manufacturer. We have 30,000 square meters of self-owned plant.
){kind=link}