Customization: | Available |
---|---|
Type: | Low-voltage |
Structure: | Single-column Disconnector |
Still deciding? Get samples of US$ 15/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
AC Isolator switches are devices or systems that isolate a particular circuit for maintenance and prevent currents from passing through. The main isolator switch, also known as an isolator, typically consists of two sets (or one set) of electrical contacts mounted in series. The line side is connected to a power supply outside the building.
AC Isolator Switch ensure an electrical circuit is completely de-energised for routine service and maintenance and can be shut down quickly in the event of an emergency. The switch separates the circuit from the main power source and discharges any current trapped in the circuit, rendering it safe to work on and ensuring fast shut down and the absence of any electrical current when an emergency stop is required.
Product Benefits
The EAS Series AC isolation switches are suitable for switching on and off AC circuit systems, such as in PV systems and air conditioning systems. This weatherproof disconnector is particularly suited for outdoor installation and can achieve IP66 protection level. The base mounted mechanism provides more convenient termination and wiring room.
EAS50 isolator is rigidly built to withstand more than just the vagaries of the water,it is designed also for frequent switching even on severe load such as switching of motor loads or other highly inductive load. Suitable to be mounted in outdoor and indoor for diverse environment.
The EAS50 Series of weather protected isolating switch is a robust range of switch suitable for virtually any external application. Included in the range is single,double and triple pole switches from 20 to 63A.
The base mounted mechanism provides for easier termination and more wiring room
EAS50 series of weather-resistant isolator wide range of applications, suitable for any outdoor application conditions. Including unipolar, bipolar, and three-pole switch, current use of 20A ~ 63A.
Installed base of devices provides a more easy termination and more wiring space. (Switch size is 165mm × 82mm, overall height 85mm.)
Install ground and neutral bars with dual clamping screws to connect the same cable clamp strip length and reliable. Terminal aperture 5-6mm.
More secure, installation switches to a metal structure with an insulating cap, insulating cap covering the base mounting screws to prevent their exposure to energized cables.
Each unit supplied with screwed conduit plugs and screwed reducers for easy connection to 25mm or 20mm conduits and screw caps. Screw caps must be installed to ensure IP Rating.
The impact Resistant base and cover will survive the hardest knocks in almost any installation. The two sections are sealed with aone piece weather seal gasket.
For security,a 7mm diameter hole is provided for padlocking the lever in the OFF position. Deep moulded barriers protect the operating lever from physical abuse or accidental switching.
All units comply to IEC60947-3.
Standard colours are Grey.