| Customization: | Available |
|---|---|
| Type: | Low-voltage |
| Structure: | Single-column Disconnector |
|
Still deciding? Get samples of US$ 15/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
AC Isolator switches are devices or systems that isolate a particular circuit for maintenance and prevent currents from passing through. The main isolator switch, also known as an isolator, typically consists of two sets (or one set) of electrical contacts mounted in series. The line side is connected to a power supply outside the building.
AC Isolator Switch ensure an electrical circuit is completely de-energised for routine service and maintenance and can be shut down quickly in the event of an emergency. The switch separates the circuit from the main power source and discharges any current trapped in the circuit, rendering it safe to work on and ensuring fast shut down and the absence of any electrical current when an emergency stop is required.
Product Benefits
The EAS50 Series of weather protected isolating switch is a robust range of switch suitable for virtually any external application. Included in the range is single,double and triple pole switches from 20 to 63A.
EAS50 series of weather-resistant isolator wide range of applications, suitable for any outdoor application conditions. Including unipolar, bipolar, and three-pole switch, current use of 20A ~ 63A.
The impact Resistant base and cover will survive the hardest knocks in almost any installation. The two sections are sealed with aone piece weather seal gasket.
For security,a 7mm diameter hole is provided for padlocking the lever in the OFF position. Deep moulded barriers protect the operating lever from physical abuse or accidental switching.
All units comply to IEC60947-3.
Standard colours are Grey.
Technical Data
| Type designation | EAS5EL/20 | EAS5EL/35 | EAS5EL/63 | ||
| Ambient temperature | -5°C ~+40°C | ||||
| Interrupting medium | Air | ||||
| Utilization category | AC-22A | ||||
| Number of poles | 1P(x=1), 2P(x=2) | 1P(y=1), 2P(y=2), 3P(y=3) , 4P(y=4) | |||
| Rated operational voltage / current | N: AC250(1P),AC440V(2P/3P/4P) | ||||
| Rated frequency | 20A | 35A | 63A | ||
| Rated Insulation voltage | (Ie) | 50/60Hz | |||
| Conventional free air thermal current | 500 V | ||||
| Conventional enclosed thermal current | (Ui) | // | |||
| Rated short-time withstand current | (Ith) | 20A | 35A | 63A | |
| Rated short-time making capacity | (Ithe) | 0,76kA, 1s | |||
| Rated conditional short-circuit current | (Icw) | 1,5kA | |||
| Short circuit protective device | (Icm) | // | |||
| Rated Impulse withstand voltage | (Icn) | 4,0 kV | |||
| Overvoltage category | II | ||||
| IP code | (Uimp) | IP66 | |||
| Pollution degree | 3 | ||||
| Suitability for isolation | Yes | ||||
| Type designation | EAS50EL |
| Number of poles | 1P, 2P |
| Terminal designation, main circuit | 1, 2 ; 1, 2, 3, 4 ; 1, 2, 3, 4, 5, 6 ; 1, 2, 3, 4, 5, 6, 7, 8 |
| Type of terminal, main circuit | Screw terminal |
| Rated cross sectional area, main circuit | 2,5-25mm2 |
| Type of conductor | Flexible or rigid |
| Number of conductors per terminal | 1 |
| Required preparation of the conductor | No |
| Stripping length (mm), main circuit | - |
| Tightening torque, main circuit (Nm) | 2,5Nm (M6) |
FAQ
){kind=link}