Hot Sell High Quality 1p 2p 3p 4p 16A to 63A Miniature Circuit Breaker DC MCB with Good Price

• Breaking Capacity: Low Voltage Circuit Breakers
• Operation: Electric Type
• Speed: Normal Type Circuit Breaker
• Arc-extinguishing Medium: Air
• Installation: Fixed
• Structure: MCB
• Model NO.: EDB1-63
• Poles Number: 1
• Type: Circuit Breaker
• Function: Conventional Circuit Breaker, Circuit-Breaker Failure Protection, Overcurrent Protection, OVP(Overvoltage Protection)
• Certification: ISO9001-2000, CE, CB, SAA
• Voltage Ui: 1000V
• Max Current: 63A
• Enclosure Box: with/Without
• Rated Current: 6A, 10A, 16A, 20A, 32A, 40A, 63A
• Imp: 6ka/10ka
• Transport Package: by Sea/Air
• Specification: box
• Trademark: Onccy
• Origin: China
• HS Code: 8536490090
• Production Capacity: 1000000PC/Year

Product Description

Uses of MCB

 

Make sure there is space in the electrical panel for the new breaker before installing a small circuit breaker. Each breaker must have a minimum of six inches between them, and no other breakers should be connected next to it.

By doing the following, you can install your new little circuit breaker:

1.Before performing any electrical system maintenance, make sure all of your equipment is turned off. Any lights, appliances, or other electrical devices in your home or place of business fall under this category.

2Locate a vacant slot in your electrical panel box and insert your new micro circuit breaker there. If extra panels are needed to accommodate more breakers but there aren't any free places, think about replacing some older breakers with newer, more energy-efficient ones.

3 Remove the large screw holding down the current breaker and remove it from its slot. Then take out the old circuit breaker wires one at a time by pulling them out through their small holes in the side of the panel box. Take note of which wire goes where on each terminal before removing them from their sockets so that when you install new wires onto new miniature circuit breakers, you'll know which wire goes where on each terminal.

4.Strip off about 3/8″ of insulation from each end of each wire before attaching it to its new corresponding terminal. Make sure you don't strip off too much insulation because you'll need enough left on each wire to secure it tightly onto its designated terminal.

5.Attach each wire to its selected terminal by pushing each wire firmly into place until it clicks into place. Then tighten each screw securely with your screwdriver so there is no chance for movement under normal conditions or during an electrical surge or power outage.

 

Product Description

 

The EDB1-63 DC Miniature Circuit Breaker is 1p,2p,3p,4p, double-throw device used to disconnect the power from a circuit. It is commonly used in low voltage applications to protect against overloads and short circuits. The EDB1-63 Miniature Circuit Breaker has a fixed current rating of 63 amps and a voltage rating of 250/1000 volts DC. The EDB1-63 Miniature Circuit Breaker also features a trip setting range of 10 to 63 amps.

EDB1-63 DC Mini Circuit Breaker 2P 500V 16A~63A

Product Benefits

• Overload and the short circuit protection function
• Rated short circuit breaking capacity up to 10 kA
• Non-polarity and Polarity both available
• Rated Current In up to 63A
• Rated Voltage up to 1000V
• Designed for PV, energy storage and other DC applications
• AS 60947.3:2018 and IEC 60947.2:2015 standard
• 2 years warranty, product insurance, and recall insurance available

Technical Data

Pole			1P	2P	3P	4P
Rated Working Voltage	Normal Voltage Ue		250V DC	500V DC	750V DC	1000V DC
	High Voltage         Ue		300V DC	600V DC	900V DC	1200V DC
Frame Current			63A
Rated Current                                                                             In			10A,16A, 20A, 25A, 32A,40A, 50A, 63A
Rated Insulation Voltage                                                              Ui			1200V
Rated Impulse Withstand Voltage                                            Uimp			6kV
Tripping Characteristics			B/C
Tripping Type			Thermal Magnetic
Rated Ultimate Short-Circuit Breaking Capacity                             Icu			6/10kA
Rated Service Short-Circuit Interrupting Capacity                           Ics			6/7.5 kA
Electrical Life		Actual	2000 Cycles
		Standard	1500 Cycles
Mechanical Life		Actual	20000 Cycles
		Standard	8500 Cycles
Overvoltage Category			III
Pollution Degree			3
Ingress Protection			IP40; Wiring port IP20
Resistance to humidity and heat			Class 2
Relative Humidity			≤ 95 %
Vibration			acc. to IEC60068-2-6
Shocks			acc. to IEC60068-2-27
Terminal capacity			2.5-25mm²
Fastening Torque of Terminals			2.5 N.m
Ambient Temperature			-30°C~70°C
Storage Temperature			-40°C~85°C
Installation Method			DIN
Elevation			≤2000m
Dimension			Width:18mm/Pole
			High: 68mm
			Depth: 81mm
Weight                                                                                             125.3g				250.55g	375.9g	501.1g

Detailed Photos

 

Company Profile

 

EXPERIENCED PV PROTECTIVE PRODUCT AND EV CHARGING STATION MANUFACTURER

With a vision of a clean, sustainable future, we strive to lead the solar energy and new energy industry through our rugged technology and reliable products. Onccy' mission is to become the leading choice for getting started with smart energy, making good technology more impactful by ensuring it's accessible to everyone, and bringing smart solar to the entire world with high-quality products.

Our Main Products: DC/AC Isolator Switch, PV Combiner box, DC circuit breaker, Surge Arrester, DC fuse holder, Rapid Shutdown, and EV Charger, etc.

With our driven engineer team, over 200+ global experts and distribution & service network spanning North America, South America, Europe, Asia, Africa and Oceania, Onccy has empowered homeowners and professionals in more than 100 countries and regions to join the journey to true open energy.
 

COMMITMENT TO QUALITY

Quality is the primary goal among each of our workshops since this leads to the best performance and safety for any Solar, Storage, and EV charging system. Our commitment to quality increased brand awareness for your company. To achieve our goal, our factory and products comply with UL, SAA, CB, CE, TUV, ISO, and RoHS standards.
 

STAYING UPDATED ON MARKET TRENDS

Achieving our goals come from formulating new products based on the market demands through our in-house R&D team. Our efforts have led to our first UL508i listed patented DC switch within china and the DC-PV2 DC switch produced for the global market. With our cutting-edge PV protective products and EV chargers, we aim to create a long-term partnership with many renewables companies.
 

FAQ

 

Q: Are you trading company or manufacturer ?
A: We are manufacturer. We have 30,000 square meters of self-owned plant.

Q: Do you have any certificates?
A: Yes,we have UL, TUV, CB, SAA, CCC, CE and other certifications.

Q: How do we make a quick response to customer , 5 inquiry ?
A: Our professional team will reply you online or by email,Skype, whatsApp and so on.

Q: Do you have any exporting experience?Which countries did you export to before?
A: We have lots of exporting experience and customers in many countries,such as America, Japan,Australia,UAE,Canada,Vietnam,Turkey,Thailand,Russia,UK,etc.

Q:Can you supply samples for checking ?
A: Yes, we can supply samples, pls contact for detailed required.

Q:How long is your delivery time?
A: Generally it is within 3days for small qty. Or it is around 15-20 days to a general order.

Q: What is the standard of package of your goods?
A: Export standard package or special package according to customer requirement.

Q:How about inspection?
A: We have the whole inspection system from raw material to end products include transient test, delay test,mechanical life test and so on.Q:What is the service offered by company?

A: We have the professional engineer team which can design and develop the mould to arrive different customer requirements. We also have the professional sales team to offer good service from pre-sale to after-sale.