DC Isolator Eds7 Hmr Hole Mounting Lockable

• Customization: Available
• Type: Low-voltage
• Structure: 35mm DIN-Rail
• Model NO.: EDS7
• Operation: Electric
• Grounding Mode: Grounding
• Movement Mode: Plug-in Type
• Number of Poles: 1p/2p/3p/4p
• Grounding: Double Ground
• Series: Four
• Run: Plug-In
• Switching Mode: Double-Throw Type
• Common Model: CR
• Structure of Operating: Electric
• Certification: ISO, RoHS, CE, ISO9001, CB, SAA, TUV, UL
• Brand: Onccy
• Rated Thermal Current: 32A
• Rated Insulation Voltage: 1500V
• Rated Impulse Withstand Voltage: 8000
• Number of DC Poles: 2 or 4
• Waterproof: IP66
• Overvoltage Category: III
• Transport Package: by Sea/Air
• Specification: box
• Trademark: Onccy
• Origin: China
• HS Code: 8536490090
• Production Capacity: 1000000PC/Year
• Package Size: 50.00cm * 50.00cm * 50.00cm
• Package Gross Weight: 1.000kg

Product Description

 

Professional Solar DC Isolator Manufacture

The ONCCY DC Isolator Switch is engineered for excellence in solar PV systems. As a factory-direct product, it stands out for its unmatched quality and reliability. Ideal for both home and commercial solar installations, this switch is a fundamental component for solar inverter DC side disconnect. It is the preferred choice of leading solar brands due to its consistent performance and ability to protect against over-voltage and overload.

Featuring special arc extinguishing instructions, the ONCCY switch promises an extended electrical life, ensuring your solar system's longevity and efficiency. Our commitment to quality is evident in our meticulous manufacturing process, where each component is pre-assembled and inspected to uphold the highest standards.

 

Product Description

 

EDS7 Door Interlock DC Isolator(1000V 1200V)

Product Benefits

• Blue/blackpadlockable handles to prevent unauthorized use
• Front plate hinged to allow access to screws without removing handle and face plate
• 3 and 4 pole versions available from stock. 6 pole version available upon request
• Auxiliary and additional blocks available

 

EDS1 series isolation switch is suitable for a power system with rated voltage DC 1200V or below and rated current 32A or below. The product can be used for infrequent switching-on and switching-off and can disconnect 1 - 2 MPPT lines at the same time. It is especially suitable for isolating lines in HVDC transmission and distribution systems, such as cutting off the high voltage DC current between solar panels and inverters

Advantages

• Protection functions: overload, short circuit
• Rated short circuit breaking capacity icu up to 10kA
• Non-polarity, easy wiring
• Rated current in up to 125A
• Rated voltage ue up to 1000V
• Designed for PV, energy storage and other dc applications

Product Benefits

• Installed at any angle can achieve IP67 waterproof level
• Contact Silver Plating, silver layer thickness to the industry's highest standards
• Arcing Time in 3ms
• Breather valve attached on the bottom of the isolator
• No Polarity
• Lockable at OFF position
• AS 60947.3:2018 and IEC 60947.1:2015 standard
• 5 years warranty, product insurance, and recall insurance available

Applications and Markets

Isolator switch is used to ensure that an electrical circuit is completely de-energised for service or maintenance. IP66 enclosures and other options are available for your selection to meet a variety of inverters types. Such switches are often found in electrical distribution , where equipment must have its source of driving power removed for adjustment or repair. Isolation switches are used in electrical substations to allow isolation of apparatus such as circuit breakers, transformers, and transmission lines, for maintenance. The disconnector is usually not intended for normal control of the circuit, but only for safety isolation.
 

Product Parameters

Technical Data

Main Parameters			EDS1/N EDS1/S
Rated Insulation Voltage	Ui	V	1500
Rated thermal current	Ith	A	32
Rated impulse withstand voltage	Uimp	V	8000
Rated short-circuit making capacity	Icw	A	1 kA,1 S
Maximum cable section(incl.jumper)
Solid		mm2	4-16
Flexible		mm2	4-10
Flexible(+multicore cable end)		mm2	4-10
Torque
Tightening torque terminal screws M4.		Nm	1.2-1.8
Tightening torque shell mounting screws ST4.2(304 stainless steel)		Nm	1.5-2.0
Tightening torque knob screws M3		Nm	0.5-0.7
Switching on or off Torque		Nm	0.9-1.3
The wiring Torque on Base		Nm	1.1-1.4
General parameters
Knob Positions			12 o'clock,OFF   3 o'clock,ON   9 o'clock,OFF   12 o'clock,ON
Electrical Life	Actual		3000 Cycles
	Standard		300 Cycles
Mechanical Life	Actual		10000 Cycles
	Standard		10000 Cycles
Number of DC poles			2 or 4
Operation temperature		°C	-40 to +85
Storage termperature		°C	-40 to +85
Pollution degree			3
Overvoltage category			III
IP rating of shafte and mounting nul			IP66

Data according to AS60947-3

Main Contacts	Voltage	EDS1/N32
Rated thermal current             Ithe		32 A
Rated insulation voltage           Ui		1500 V
Distance of contacts(per pole)		8 mm
Rated operational current Ie(DC-PV2)
4 layers, only 2layers in series, with two load 1     2	300V	32 A
	600V	32 A
	800V	16 A
	1000V	9 A
4 layers, 4 layers in series, with one load 1    2      3     4	300V	32 A
	600V	32 A
	800V	32 A
	1000V	32 A

Detailed Photos

 

Company Profile

EXPERIENCED PV PROTECTIVE PRODUCT AND EV CHARGING STATION MANUFACTURER

With a vision of a clean, sustainable future, we strive to lead the solar energy and new energy industry through our rugged technology and reliable products. Onccy' mission is to become the leading choice for getting started with smart energy, making good technology more impactful by ensuring it's accessible to everyone, and bringing smart solar to the entire world with high-quality products.

Our Main Products: DC/AC Isolator Switch, PV Combiner box, DC circuit breaker, Surge Arrester, DC fuse holder, Rapid Shutdown, and EV Charger, etc.

With our driven engineer team, over 200+ global experts and distribution & service network spanning North America, South America, Europe, Asia, Africa and Oceania, Onccy has empowered homeowners and professionals in more than 100 countries and regions to join the journey to true open energy.
 

COMMITMENT TO QUALITY

Quality is the primary goal among each of our workshops since this leads to the best performance and safety for any Solar, Storage, and EV charging system. Our commitment to quality increased brand awareness for your company. To achieve our goal, our factory and products comply with UL, SAA, CB, CE, TUV, ISO, and RoHS standards.
 

STAYING UPDATED ON MARKET TRENDS

Achieving our goals come from formulating new products based on the market demands through our in-house R&D team. Our efforts have led to our first UL508i listed patented DC switch within china and the DC-PV2 DC switch produced for the global market. With our cutting-edge PV protective products and EV chargers, we aim to create a long-term partnership with many renewables companies.
 

FAQ

Q: Are you trading company or manufacturer ?

A: We are manufacturer. We have 30,000 square meters of self-owned plant.

Q: Do you have any certificates?
A: Yes,we have UL, TUV, CB, SAA, CCC, CE and other certifications.

Q: How do we make a quick response to customer , 5 inquiry ?
A: Our professional team will reply you online or by email,Skype, whatsApp and so on.

Q: Do you have any exporting experience?Which countries did you export to before?
A: We have lots of exporting experience and customers in many countries,such as America, Japan,Australia,UAE,Canada,Vietnam,Turkey,Thailand,Russia,UK,etc.

Q:Can you supply samples for checking ?
A: Yes, we can supply samples, pls contact for detailed required.

Q:How long is your delivery time?
A: Generally it is within 3days for small qty. Or it is around 15-20 days to a general order.

Q: What is the standard of package of your goods?
A: Export standard package or special package according to customer requirement.

Q:How about inspection?
A: We have the whole inspection system from raw material to end products include transient test, delay test,mechanical life test and so on.Q:What is the service offered by company?

A: We have the professional engineer team which can design and develop the mould to arrive different customer requirements. We also have the professional sales team to offer good service from pre-sale to after-sale.